Divli Lattice – Pendant Lamp Designed by Claude using Autodesk Fusion and Blender
After getting Claude to model a rose in Autodesk Fusion and the Taj Mahal in Blender, I wanted to see what happens when Clause was given the freedom to use both tools to model a single object. So I asked Claude Fable 5.2 to design a 3D-printable pendant lamp, driving Fusion and Blender through their MCP servers. My entire brief was three facts: an E27 bulb, PLA material, and a 250 mm diameter. Claude decided everything else and gave me a first version. Then I stepped in and refined it into a second. This post covers both.
The Divli Lattice Pendant Lamp, version 2, rendered in Blender.
V1: What Claude designed on its own
Claude split the work the way a product team would. The parts that must fit were modeled in Fusion, and the shade was grown in Blender around a collar exported from Fusion. The result had four ideas I liked.
The hub needs no hardware. It is a ring that slips over a standard E27 lamp holder and is clamped by the holder’s own ring nut.
The shade locks with gravity. You push it up, twist it 40 degrees and let go. It drops 2 mm and three lugs seat in notches, so the weight of the shade keeps it locked. I did not ask for this locking mechanism. Claude came up with it all by itself.
How the V1 lock works. The dark lug on the hub travels through the slot in the white collar.
The Fusion model is truly parametric: 18 named parameters, every sketch fully constrained. Claude changed several of them itself to confirm the model rebuilt cleanly.
The shade is built for 3D printing. Its 40 struts all climb at exactly 45 degrees, so the lattice is designed to print rim-down without supports.
For a three-line brief, that is a smart first version. But it was Claude’s idea of a finished design, not mine.
V2: Where I came in
A softer shape: The first shade had a shoulder that looked too sharp to me. I said so, Claude sketched five smoother profiles, and I picked one called Soft Bell. Claude rebuilt the shade on it.
Hiding the mechanism: The gravity lock worked, but it was cut right through the collar of the hub. You could see the slots and the dark lugs from outside. I asked Claude to hide the mechanism. It turned the slots into pockets on the inside of the collar and left a 2 mm skin over them, so the outside is now a plain ring.
V1: the bayonet slots cut through the collar. The hub is dark, the collar white, with a wedge cut away.
After my first request: the lug now sits in a pocket hidden inside the collar wall.
Printing the hub without supports: There was a second problem, and it had been there since V1. Claude had put its effort into making the shade printable without supports, but it forgot to check whether the hub was printable too. The tops of its slots were flat, and so were its lugs. Both are overhangs that need support material, and inside the hidden pockets that material would be very hard to remove. I asked for the tops to be sloped at 45 degrees to eliminate the need for supports.
Claude sloped the pocket tops and the top of each lug to match. The two surfaces now sit flat against each other, both print without supports, and because they are conical, the shade centers itself as it drops into the lock.
V2: the pocket top and the lug are both sloped at 45 degrees, so neither needs support.
One hub, eight shades
At this point I was happy with the design. But I decide to go a step further. Because every shade meets the hub at the same collar, I asked Claude for variants of the same overall design and it obliged. There are now eight: four open structures and four thin shells with a 1.2 mm wall that glow when the lamp is on. All share the Soft Bell profile and the hidden lock. I named the pendant lamp family Divli, after the traditional brass lamp of Goa, where I live.
![]() Divli Lattice 40 struts at 45 degrees |
![]() Divli Honeycomb Hexagonal cells |
![]() Divli Fin 36 vertical blades |
![]() Divli Turbine 30 twisted blades |
![]() Divli Twist Spiraling ribs |
![]() Divli Facet Low-poly triangles |
![]() Divli Quilt Pillowed diamonds |
![]() Divli Flute 32 vertical flutes |
My takeaway
From a three-line brief Claude got to a credible, working design faster than I could have sketched one. And once I told it what to change, it did all the modeling. I did not touch a sketch, a spline or a mesh.
But look at what it took to get from V1 to V2. Claude did not notice that the shoulder looked bad. It did not see that slots cut through the hub were ugly. It checked the shade for printability but missed the hub. None of these were modeling mistakes. They were judgment calls, and Claude made them without realizing they were calls at all.
So here is my takeaway from this experiment. AI is very good at answering the question it has been asked. It is not so good at noticing the questions nobody asked. So the human’s job does not go away. It moves from doing the work to reviewing and directing it, and that takes someone who knows what good looks like. As AI gets better at doing the work, the person directing it matters more, not less.
AI raises the ceiling on execution. The human still sets the standard.
Download 3D models: Link








